Gunsmith Services

Services

Gunsmithing Services Innovative Custom Guns offers both packaged and individual gunsmithing services. If  you can not find what your looking for just e-mail or call us and we will do are best to help you. We offer specialized gunsmithing for 1911s, revolvers, Browning Hi-Power, CZ/EAA, Smith & Wesson, AR-15s, and more.
All services require a deposit.  Deposits are non-refundable.
Packages
Basic Reliability Package    160.00 Polish and throat barrel Polish feed ramp Polish bolt face EGW HD extractor Tune extractor Test fire for function TACTICAL CARRY PACKAGE   625.00 Polish and throat barrel Polish feed ramp Polish bolt face EGW HD extractor Tune extractor EGW long ejector EGW  oversized firing pin stop ( hold extractor from clocking ) 4# Trigger job with EGW hammer, sear and disconnect Novak lo-melt rear sight Dovetail front sight Does not include finish Test fire THE ULTIMATE TACTICAL/CARRY PACKAGE      1125.00 Novak lo-melt rear sight Dovetail front sight Lower and flute ejection port EGW long ejector Beavertail (ed brown/wilson/ect.) Polish and throat barrel Polish bolt face and feed ramp Tune extractor Melt package EGW carry bevel bushing Weld and machine slide to frame Weld and machine barrel hood Thumb safety (ed brown/wilson/ect.) Three hole or solid matched trigger Trigger job EGW hammer and sear ISMI recoil spring Does not include finish TACTICAL/LIMITED PACKAGE-BUILT ON CUSTOMER SUPPLIED FRAME   2395.00 Caspian slide Match barrel EGW extractor/ejector/firing stop Polish and throat Lower and flute ejector port Melt package Arched or flat main spring housing Thumb safety (ed brown/wilson/ect.) Beavertail (ed brown/wilson/ect.) Accuracj job w/ EGW carry bevel bushing Bomar type Champion rear sight Dovetail front sight Steel mag catch Full length guide rod w/ spring (1or2 piece) Trigger job EGW hammer and sear Three hole or solid matched trigger Does not include finish HI CAPACITY OPEN GUN-BUILT ON CUSTOMER SUPPLIED FRAME    2795.00 Your choice EGW comps Caspian bar stock slide EGW long ejector Trigger job EGW hammer and sear Match ramp barrel EGW extractor and os firing pin stop Beavertail and thumb safety Lower and flute ejection port Full length guide rod and spring EGW scope mount EGW billet slide stop All EGW internal parts Fit trigger Does not include finish or scope EGW mag well add 80.00 STEEL GUN SPECIAL PACKAGE-BUILT ON CUSTOMER FRAME    2895.00 Same as hi-capacity open gun w/ EGW 3 port aluminum comp EDM lightening slots in slide Lighten rear of slide with swoop EXTRAS Serrate front or rear of slide    85.00 Semi-profile comp    add 225.00 Flat top slide and comp    85.00 Flat top and serrate slide and comp    125.00 Full profile comp    add 175.00 Mag bottom or mini paddle    40.00 Blend and open well    75.00 Ambi safety    add 65.00 FINISHES Matt blue gun   150.00 Blue gun w/ polish sides on slide    175.00 Blue gun w/ polish sides on frame and slide   200.00 Matt hard chrome gun   300.00 Hard chrome gun w/ polish sides of slide    360.00 Hard chrome gun w/ polish sides of frame and slide    420.00 Tacikote Polymer finish gun    275.00 Glassbead stainless gun matt    125.00 Polish sides of slide and frame on stainless gun    add 75.00 Remove inperfections  i.e. machine marks/scratches    Based on time
Individual Services
1911 SERIES RELIABILITY 100  Polish,throat barrel/polish bolt face/polish feed ramp a nd tune extractor    85.00 101  EGW long ejector for 45    50.00 102  EGW long ejector for commander 9/38 & 40/10    50.00 103  EGW HD extractor fit and tuned   75.00 104  Lower port and clear   60.00 105  Lower, flute and clear ejection port   85.00 106  EGW oversized firing pin stop fitted    40.00 107  Install EGW Officers bushing, guide rod, reverse plug    150.00 a.  IMSI spring kit installed officers    75.00 108  Install steel insert feed ramp (aluminum frame guns)    160.00 ACCURACY 110  EGW matched carry bevel bushing installed   50.00 a. EGW melt bushing installed and blended    100.00 b. EGW matched bushing installed non-standard    65.00 111  Accuracy job (weld slide to frame/weld hood length and width)    210.00 112  Accuracy job w/ matched bushing    250.00 114  Fit matched barrel and chamber (labor only)    175.00 115  Machine frame for ramped barrel    100.00 116  Machine fit slide to frame    90.00 117  Weld slide to frame and machine fit    160.00 118  Recrown barrel   40.00 Prices on barrels upon request FUNNEL MAG WELL 119  Machine  frame well    75.00 120  Machine blend S&A well to frame    85.00 121  EGW Stadium weld on well machined blended on 1911 or Para    250.00 122  EGW Alum. mag well installed and blended (STI,SV,Para,1911)  includes part    85.00 123  Point up mainspring housing (S&A,ect.)    75.00 CHECKERING AND SERRATING 124  Checker main spring housing   90.00 125  Checker front strap w/Border bottom and high cut w/relief top  Select LPI    20/25/30    225.00 126  Install frontstrap checkered insert  (para,caspian,1911)  Select LPI  20/30    275.00 127  Checker under trigger guard  85.00 128  Checker front of trigger guard and square top    100.00 129  Weld and checker front of guard    135.00 130  Flat top slide   75.00 131  Flat top slide and serrate  125.00 132  Serrate back of slide   90.00 133  Front serrations    85.00 134  Rear serrations    85.00 135  French borders on slide    75.00 136  Liebenberg ball cuts on slide    85.00 SIGHTS 137  Whit dots in your sights    POR 138  Machine Bomar cut/Install Champion sight (included)    135.00 139  Novak Lo-Melt rear sight cut + cost of part (select below)      60.00           plain black-32.95          white dot-37.95           fiber optic-44.95            tritium dot-89.95           tritium bar-89.95         wide notch plain black-34.95           wide notch white dot-39.95        wide notch fiber optic-46.95 140  Dovetail front sight cut/Install + cost of part (select below)  40.00           plain black-34.99          fiber optic-34.99           tritium dot-59.99          white dot-49.99           gold bead-99.99 We install other manufactures of sights, just e-mail or call us. We also install scope mounts  TRIGGER WORK 141  Carry trigger job (between 3# and 4-1/2 #) Includes EGW sear, disconnector and sear spring    185.00 142  Competition trigger job (between 2-1/2# and 3#) Includes EGW or Koenig hammer, EGW sear, disconnector and sear spring   255.00 143  EGW commander hammer   75.00 144  Matched trigger installed (solid/3-hole/short/long)    50.00 145  E-trigger installed    60.00        Add $25 to any trigger work being completed on series 80 firearms SAFETIES 146  Install beavertail (Ed Brown/Wilson/s&a/ect.)    125.00 147  Install single side safety (Ed Browb/Wilson/ect.)    75.00 to 90.00 148  Install ambi safety (Ed Brown/Wilson/ect.)    135.00 149  Weld and machine frame for beavertail    175.00 150  Install EGW barstock single side safety    90.00 150a  Insall EGW barstock beavertail  150.00 REPAIRS 152  Weld, recut and polish feed ramp in frame .45  125.00 153  weld and recut grip or thumb safety for proper function    25.00 154  Replace stripped/loose grip bushing with O/S bushing (each)    20.00 155  Weld and recut disconnector track (series 80)    125.00 156   Repair cracked dust cover (per side)  75.00 157  Replace front strap with HI-GRIP insert (weld and dress)    275.00       Here are some images of front straps that have been repaired with checkered inserts. 158   Carry bevel package to remove sharp edges    125.00 160   Weld up & dress scope mount holes (each)  75.00 to 125.00 EXTRAS  161  EDM lightning slots    125.00 162  Machine lightning slots in slide    100.00 We do all types of custom machinig. From 1 off parts to machining from your ideas or prints. We also do all kinds of welding repairs from sight repairs to weld on magwells. 163  Barrel threading    POR COMPENSATORS We carry a full line of EGW compensators. From single port full profile comps to 9 port round comps. We will build you a top end or a full house comp gun, or put a comp on your excisting gun. REVOLVERS RELIABILITY 164   Check timing    0 165   Check end shake    0 166   Check cylinder gap 0 167   Polish chambers (each)    8.00 168   Recut forcing cone    35.00 ACCURACY 169  Install barrel    price of blank + 275.00 170   Slab side barrel    85.00 171  Crane lock   75.00 172  Set back barrel (cylinder gap)   150.00 173  Swap customer’s barrel for another    POR 174   Set end shake  50.00 175   Align crane   50.00 FUNNEL 176  Chamfer chambers (each)   8.00 177  Cut cylinder latch for speed loaders   50.00 SIGHTS 178  Install Weigand mount on barrel (includes part)    85.00 179   Install ribs (BoMar, Wichita, etc.,)    POR 180  EGW rail mount-drill and tap required (includes part s&w and ruger)   100.00 181  EGW rail mount for factory drilled guns    40.00  TRIGGER WORK 182   Action job   125.00 183  Fit non floating hand (S&W)    POR 184  Bob and surface grind radius on hammer   85.00 185  Install adjustable trigger stop    40.00 186  Polish out serrations on narrow trigger   50.00 187  Polish out serrations on wide trigger   75.00 188  Round (radius) your trigger   75.00 EXTRAS 189   Under lug    100.00 190    Matte finish stainless steel revolver    125.00 COMPENSATORS 191   Compensator added to barrel job     150.00 192    Dual port compensator added to barrel job    200.00 193   Port in stock barrel    100.00 194   Round holes v-pattern    100.00 BROWNING HI POWER  RELIABILITY 200 Machine hump from barrel ramp and polish    60.00 201 Polish straight ramp and check extractor, polish bolt face    75.00 202 Recut extractor hook and tune    30.00 ACCURACY 203  Accuracy job    125.00 204  Install match barrel   100.00 205   Match barrel    POR FUNNEL 206  Funnel front sides and back of mag well    75.00 CHECKERING AND SERRATING 207   Stipple back strap    150.00 208   Stipple front strap    150.00 209   Serrate rear of slide    75.00 SIGHTS 210   BoMar rear sight low melt into slide    150.00 211   Fixed rear sight of your choice installed   90.00 212   Dovetail front sight (specify)   70.00 213  Novak low melt rear sight   90.00 TRIGGER WORK 214  Trigger job w/ EGW sear    160.00 215  EGW Commander hammer    POR 216   Install wide trigger (part not included)    25.00 SAFETIES 217   Extend existing thumb safety per side   90.00 218   Install ambi safety(part not included)    50.00 EXTRAS 219   Oversize magazine release button    40.00 220   Beavertail weld on    250.00 TZ/P-9/CZ      AT-4/EAA RELIABILITY 225  Polish feed ramp, tune extractor, polish and debur bolt face    75.00 ACCURACY 226  Fit match barrel    100.00 227  weld and machine slide to frame fit    140.00 FUNNEL 228  Funnel mag well    75.00 229  Stadium funnel( welded w/ solid back)     225.00 CHECKER 230  Checker front insert welded and dressed    275.00 SIGHT WORK 231  Bomar rear sight installed    150.00 232  Dress out factory sight    35.00 233  Dovetail front sight   85.00 234  Install EGW weaver base mount    150.00 TRIGGER WORK 235  Competition  trigger job w/aluminum single action trigger and EGW sear    200.00 236  EGW comp. hammer 237  Carry trigger job single and clean up double action    125.00 SAFETIES 238   Build up safety width and length and serrate   90.00 EXTRAS 239  Weld on beavertail    250.00 240  Front serrations    100.00 241  Lightning slots    125.00 Guns not listed you can e-mail or call us